Always 100% OE, guaranteed

It's a statement that should give you total confidence: every turbo supplied by BTN Turbo is 100% Original Equipment, exactly as the vehicle manufacturer fitted.

Does OE matter?
It could well do, if you fit a non-OE turbo. A non-original turbo can generate fault codes with the engine management system - indicating reduced power, higher fuel consumption or excessive emissions. Prompting your customer to come back and complain.

Then there's the risk of premature failure with a non-OE turbo. Modern turbos are highly complex, with tight tolerances and critical settings, which makes it difficult to rebuild them to their exact original specification.

100% OE options from BTN Turbo
All turbos from BTN Turbo are 100% OE - conforming precisely to original specifications, providing the correct performance and totally compatible with the vehicle's engine management system.

As Europe's largest independent turbo distributor, BTN supplies brand new turbos from all the major manufacturers: Garrett, BorgWarner, Holset, Mitsubishi, Schwitzer and IHI. They are:

  • first fit, straight from the original manufacturer's production line
  • balanced and calibrated to precise, correct tolerances
  • flow bench tested to provide correct performance.

Save 40% on OE
If you want to fit an OE turbo but you're on a tight budget, BTN Turbo offers an alternative to brand new: Original Manufacturers Remanufactured turbos, including the Garrett Original Reman range. All these turbos are 100% OE, direct from the original manufacturers. They use the correct OEM components, are assembled and calibrated to precisely the same settings as a new unit, and factory tested to provide identical performance. So you know they'll be compatible with the vehicle's ECU.

Saving up to 40% compared to the equivalent new turbo, Original Manufacturers Remanufactured turbos are exclusively available from BTN Turbo through their OMX Exchange programme. BTN Turbo can supply VNT variable turbine and REA electronic actuator turbos, covering a wide range of popular older models. It means fitting a 100% OE replacement turbo is cost-effective even for lower value vehicles.

Two year warranties the BTN standard
Whether it's a brand new unit or Original Manufacturer Remanufactured, every turbo supplied by BTN is covered by a two year warranty against manufacturing defects. It's further assurance they provide all the quality, performance and reliability you and your customers expect.

Protecting a new installation
BTN always advises that to ensure a successful replacement turbo installation, it's essential to find out what caused the old turbo to fail and eliminate the fault.

BTN Turbo's fact sheets, free to download from their website at www.btnturbo.com, explain how to diagnose a turbo failure, so you can rectify the fault before fitting the replacement.

Only 1% of turbo failures are due to a manufacturing fault with the turbo itself. In 95% of cases, the failure is oil related, and often the reason is oil starvation.

Pipes available with selected turbos
BTN Turbo also stocks oil feed pipe kits covering popular applications, available when you buy a BTN-supplied turbo. This saves you the hassle of having to source the oil feed pipe separately. Fit a new pipe, and you've eliminated another potential reason for failure.

Check the BTN website at www.btnturbo.com or call their helpline on 01895 46666 to check if an oil feed pipe kit is recommended and available for the turbo you're replacing.