Universal Press & Pull Sleeve Kits

A universal system for the removal and installation of suspension bushes, bearings, seals etc By selecting the appropriate diameter sleeves, the bush / bearing / seal is ‘pressed’, or ‘pulled’ by the action of turning the spindle nuts in opposing directions.

08790000 – XL Basic Kit

• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000)
• Allows access to a wider range of vehicles, particularly SUV’s and LCV’s
• Contains 8 x Press Sleeves in 2mm diameter steps
• Inside Diameter Range: 82 - 88mm and 98 - 104mm
• Outside Diameter Range: 92 - 98mm and 108 - 114mm
• 4 x Step Plate Discs
• 2 x 20mm Pulling Spindle Adaptors with thrust bearings M20
• Supplied in moulded storage case

http://www.sykes-pickavant.com/products/suspension-tools/bush-removal-and-installation/293

Also available:

08797500 – XL Comprehensive Kit

• Complete kit for SUV, LCV, PSV, HGV
• Contains 20 x Press Sleeves in 2mm diameter steps
• Inside Diameter Range: 74 - 112mm in 2mm steps
• Outside Diameter Range: 84 - 122mm in 2mm steps
• 4 x Step Plate Discs / 4x Pulling Spindles with nuts & thrust bearings M10 / M12 / M14 / M16
• 2 x 20mm Heavy Duty Pulling Spindles (M20 long & M20 short) with thrust bearings
• Supplied in moulded storage case
http://www.sykes-pickavant.com/products/suspension-tools/bush-removal-and-installation/295