Blue Print has just added 7 new tools to range. Available to UAN members through FPS.

Tools are clearly listed next to the vehicle and part for intended use, along with descriptions and usage instructions where necessary. Products are covered by a 3-year, unlimited mileage warranty.

• GEN 2 Wheel Bearing Tool – ADC45502
This is an essential tool for removing and installing ‘Generation 2’ type wheel bearings on the Mitsubishi Colt and Smart ForFour (2004>) due to the need to remove and replace the whole drive flange assembly.

• Mini Oil Filter Removal Tool – ADG05519
Due to the propensity of the aluminium oil filter housing to seize or become damaged during removal, this tool is essential for replacing Blue Print oil filter ADG02124 on the Mini Cooper, Cooper S and One (01-06), quickly and efficiently, without damaging it. It is also necessary for replacing the oil filter on VAG 1.9 (ASY) engines, Ford and Jaguar 2.2D, Mercedes-Benz Vito, Ford Duratorq diesel engines and the new Transit vans.

• Glow Plug Socket – ADG05512/3/4 ADG05520
Extra long 8mm, 9mm, 10mm and 12mm glow plug sockets designed to grip and extract the glow plugs on all applicable vehicles.

• Glow Plug Socket – ADG05518
This solution combines a 12mm deep socket with a reinforced adaptor, enabling the removal of glow plugs in difficult to access locations.

• Oil Filter Removal Tool – ADG05521
This tool is essential for replacing Blue Print oil filters ADV182107 and ADN12121 on nearly 40 Audi, Nissan, Renault, SEAT, Skoda, Suzuki and Volkswagen, petrol and diesel applications.

• Wheel Bearing Socket – ADK85503
This tool is essential for replacing the front wheel bearings (Blue Print part number ADK88223C) on the Suzuki Jimny 1.3i (1998>) due to the bearing being held in place with lock nut, which needs this special four pin adapter to remove it.

• Nissan Navara D40 Seal Fitting Tool – ADN15502
This fitting tool allows for easy installation of new rear axle oil seals on the Navara D40 2.5DT (2005>), 3.0DT (2010>) which are a high failure item and due to their location in the half shaft, incredibly difficult to replace without it.

For more information on any of these tools, please contact your local FPS Representative today.